Double-Stacked Can Shelf Management Systems
One pull. Everything up front.
Concept P.O.S. designs and manufactures the Robusta pull-tab system for cans stacked on two levels. Shelf pushers and dividers hold each flavour in its own lane, two cans high, and a single pull on the tab brings the cans back to the shelf edge after a rush of sales. Every configuration is built to your shelves.
One pull brings the lane forward
Front-facing again in one motion
A neat display, two cans high
TWO LEVELS, ONE LANE
Cans stacked two high share the same lane: more units on display without widening the facing.
LABELS ON DISPLAY
Both levels face the shopper, aligned behind a clear retaining strip, so every flavour is easy to read.
ONE-PULL REFACING
A pull on the tab brings the cans back to the shelf edge. Refacing a lane comes down to a single motion.
EASIER SHOPPING
Each flavour keeps its lane on both levels, so shoppers find their can without reaching to the back of the shelf.
BUILT TO YOUR SHELVES
Bases, depth up to 24 in and retaining strips are configured to your shelves and the cans you carry.
A two-level can display matched to your shelves
Tell us your shelf depth and width, the can formats you carry and how many flavours share the section. Our team will recommend the bases, dividers, retaining strips and pull-tab layout that fit.
Better Shelf Organization for Double-Stacked Cans
Cans are among the fastest-moving formats in retail, and they rarely stay where they were placed. Stacked two high to make the most of a shelf, 473 ml cans of craft beer, soft drinks, energy drinks or sparkling water present a full, colourful facing when a section has just been stocked. A few hours of sales later, the front of each lane is empty, the remaining cans wait at the back and the top level has drifted out of line.
Concept P.O.S. designs and manufactures double-stacked can shelf management systems built on the Robusta pull-tab pusher. Each lane holds a column of cans on two levels, framed by shelf dividers and held at the front by a clear retaining strip. When the lane needs refacing, one pull on the tab brings the cans back to the shelf edge: one pull, everything up front.
That structure is the basis of better shelf organization. Lanes keep each flavour, brand and format in its own space, label holders identify the product and its price, and the pull-tab turns refacing into a quick routine instead of a hand-sorting job. Shoppers see a complete selection of front-facing products on both levels, and your team restores the presentation in moments after a busy period.
Like all our merchandising solutions, the system is configured to your shelves: base width, depth up to 24 in, divider layout and retaining strips. We start from the cans you carry and the space you have, then design the display pushers around them.
Request a Custom Shelf Management Solution for Stacked Cans
Tell us about your can formats, shelf dimensions, number of flavours and merchandising goals. Use the form below to tell us more about your double-stacked can shelf management project. A member of our team will review your request and contact you to discuss the best solution for your retail display.
Why Stacked Can Displays Can Be Difficult to Maintain
A can is round, smooth and printed all the way around. Shoppers pick one up, turn it to read the style or the flavour, and often set it back a lane over or a level higher. When cans are stacked two high, every purchase from the front leaves a gap, and the cans behind do not move forward on their own when nothing pushes them. By mid-afternoon, a section that looked full in the morning shows empty fronts, hidden inventory at the back and top cans leaning out of line.
Variety adds to the challenge. A single brewery can carry a dozen seasonal releases, and energy drinks or sparkling waters multiply flavours from one month to the next. When several varieties share a section, a can returned to the wrong place quickly turns into a mixed row, and the label holder no longer matches what sits behind it.
Keep Products Front-Facing
The pull-tab gives each lane a simple way back to the front. Instead of reaching into the shelf to slide cans forward one at a time, staff pull the tab and the cans return to the shelf edge on both levels, labels facing out. A front-facing display reads as fully stocked, even when part of the inventory has already sold.
Reduce Mixed Rows
Shelf dividers give every flavour its own lane from front to back. A can set down in the wrong spot stands out immediately instead of blending into the next variety, and the two levels of a lane always show the same product. Restocking follows the same logic: each new case goes straight to the lane that carries its label.
Improve Shelf Maintenance
Refacing a double-stacked can display by hand means unloading the top level, sliding the bottom cans forward and stacking them again. With the Robusta pull-tab, the routine comes down to one motion per lane, at the moment that suits your replenishment rounds. The time saved goes back to service, restocking and the rest of the store.
Shelf Pusher Systems for Cans on Two Levels
A shelf pusher system keeps products at the front of the shelf, where shoppers see them and reach them easily. For cans stacked two high, the Robusta pull-tab version is the configuration Concept P.O.S. presents: each lane is built on a black Robusta base, with a pusher at the back of the column and a pull-tab at the front.
Unlike a spring that pushes continuously, the pull-tab acts when you decide. Cans stay where shoppers leave them between rounds, then one pull brings the remaining stock forward in a single motion. This suits beverage sections that are refaced and replenished in rounds rather than watched continuously, and it gives staff a predictable routine for every display pushers system in the store.
One Pull, Everything Up Front
The pull-tab is the heart of the system. Pulling it draws the lane's cans back to the shelf edge, top level included, so the facing is restored without unloading anything. The motion is the same on every lane, which makes refacing easy to teach and quick to repeat after a busy period.
Refacing When It Suits Your Routine
Because the mechanism does not push on its own, refacing happens at the moment you choose: at opening, before a rush, during a restocking round. It fits naturally into an existing replenishment schedule, so the beverage section is front-facing when traffic peaks.
Bases and Depths up to 24 in
Robusta regular bases come in 2 in and 2.5 in widths, with a maximum depth of 24 in. The depth is chosen from your shelf, and the base width from your can format and lane layout. Beyond 24 in, the configuration is validated with our team rather than extrapolated.
Product Pusher Trays for Two-Level Can Displays
Product pusher trays turn a flat shelf into defined lanes. In a two-level display, each lane holds one column of cans on two levels, so every flavour gets the same width from the front of the shelf to the back. Inventory stays visible, since nothing can slip behind a neighbouring variety, and a lane that runs low is easy to spot during a walk-through.
One Lane per Flavour
Assigning one lane to each flavour, style or size keeps the section readable for shoppers and simple for staff. Best-sellers can be given two or three lanes side by side, while limited releases take a single lane without disturbing the rest of the layout.
Retaining Strips at the Front
A clear retaining strip closes the front of the lanes and keeps the first cans in place while leaving the labels visible. Robusta retaining strips are 5 ½ in wide and come in 36 in or 48 in lengths, like the rear blocks installed at the back of the system.
Support Plates and Mobile Pushers
Each column rests against a support plate. Robusta plates range from 1.88 in to 2.75 in wide by 2 7/8 in high, with an XXL format of 4 in by 6 in, and mobile pushers are offered in 4 in and 6.75 in. Our team selects the combination that matches your can diameter and stacking height.
Cans on the Shelf
Common Display Needs for Double-Stacked Cans
Double-stacked cans cover a wide range of beverages, each with its own pace of sale, number of varieties and way of being shopped. The common thread is the format: a tall, round can that looks its best when every label faces forward on both levels. The configuration presented by Concept P.O.S. holds 473 ml cans on two levels; other can sizes are confirmed from measurements before production.
Craft Beer in 473 ml Cans
Microbreweries release new styles and seasonal batches constantly, and the 473 ml can is one of their most common formats. Shoppers browse slowly, read labels and compare styles, then often set a can back in the wrong lane. Dividers keep each beer in its own lane, the pull-tab restores the facing after a busy weekend, and label holders carry the style, the brewery and the price.
Soft Drinks and Sparkling Water
Soft drinks and sparkling waters sell in volume and in many flavours, which makes them prone to empty fronts and mixed lanes. Stacking two levels of cans per lane increases the number of units presented within the same facing, while dividers keep cola, citrus and fruit flavours clearly separated. A quick pull on each tab before the after-work rush keeps the section looking full.
Energy Drinks
Energy drinks are often an impulse purchase made in a few seconds. Shoppers need to identify their brand and flavour instantly, which is easier when the cans are aligned at the shelf edge and the price sits right below. Product display pushers keep these fast-moving lanes front-facing, and the pull-tab lets staff restore them in one motion between deliveries.
Our page on beverage shelf management systems covers the rest of the category, from bottles to multipacks.
Ready-to-Drink, Seasonal and Promotional Cans
Beyond the best-sellers, many can categories live on rotation: new flavours, limited editions and products tied to a season or a promotion. These lines need to become visible quickly and leave cleanly, without disturbing the permanent lanes around them.
Ready-to-Drink Cocktails and Coolers
Ready-to-drink cocktails and coolers come in many brands and flavours that look alike at a glance. Grouping them in dedicated lanes, two cans high, helps shoppers compare without pulling cans out of line, and label holders make prices and formats easy to read. Where these products are sold refrigerated, the configuration must be validated for the cold: Blizzard is our model built for refrigerated and frozen aisles.
Iced Teas, Cold Coffees and Juices
Iced teas, cold coffees and canned juices often share a section with soft drinks. Dedicated lanes keep the categories distinct and stop a slower-moving flavour from disappearing behind a best-seller. The pull-tab keeps every lane front-facing, whatever its turnover.
Seasonal Releases and Promotions
Seasonal releases and promotional cans need a strong presence for a limited time. Because Robusta lanes are modular, a few lanes can be assigned to a feature product, then returned to regular varieties at the end of the campaign. In convenience stores and micro-markets, where space is tight, this flexibility lets a small section follow the calendar.
Robusta Pull-Tab for Cans: Frequently Asked Questions
Which cans does the Robusta pull-tab system hold on two levels?
The configuration presented by Concept P.O.S. holds 473 ml cans stacked on two levels, the format used by many craft beers, soft drinks, energy drinks and sparkling waters. Other formats, such as 355 ml or slim cans, are reviewed from measurements: we never assume compatibility from a description alone.
Pull-tab or spring: which mechanism suits stacked cans?
Robusta is offered with both. The configuration presented for cans on two levels uses the pull-tab: one motion brings the whole lane back to the shelf edge at the moment you choose, which suits beverage sections replenished in rounds. The calibrated spring applies continuous forward pressure and advances the next unit with no intervention. Our team settles the choice with you from your can format, turnover pace and shelf depth.
What component dimensions are documented for Robusta?
Regular bases come in 2 in and 2.5 in widths, with a maximum depth of 24 in. Divider bases are 2 in wide at the same maximum depth, and dividers reach 4 in in height. Mobile pushers are offered in 4 in and 6.75 in. Support plates range from 1.88 in to 2.75 in wide by 2 7/8 in high, plus an XXL format of 4 in by 6 in. Retaining strips measure 5 ½ in wide in 36 in or 48 in lengths, as do rear blocks. The number of lanes and the total width are defined with you from your shelves.
What are the limits of the system?
Documented depth stops at 24 in: beyond that, the configuration must be validated rather than extrapolated. Robusta is not the model built for the cold: refrigerated and frozen aisles belong to Blizzard, so cans sold refrigerated call for a configuration validated with our team. We do not publish load capacities or facing counts, since each project is confirmed from your actual formats. Finally, some merchandise should never be pushed, whatever the model, such as heavy liquid jugs: these are organized with dividers and label holders instead.
How do I get a quote for double-stacked can shelves?
Use the form on this page to send us the inside dimensions of your shelves (width, depth and available height), the number of sections to equip and a photo of the current display. Tell us which can formats you carry and how many flavours share the section. You can also call us at 1 (888) 422-0605 or write to sales@conceptpos.com: our team will prepare a custom quote.
Which cans does the Robusta pull-tab system hold on two levels?
The configuration presented by Concept P.O.S. holds 473 ml cans stacked on two levels, the format used by many craft beers, soft drinks, energy drinks and sparkling waters. Other formats, such as 355 ml or slim cans, are reviewed from measurements: we never assume compatibility from a description alone.
Shelf Pushers, Dividers and Label Holders for Can Displays
A two-level can display is an assembly of components that work together: pushers bring cans forward, dividers define the lanes, retaining strips hold the front and label holders show the price. Each one solves part of the problem, and the result depends on how well they are matched to your cans and shelves.
Shelf Pushers, Bases and Pull-Tabs
The Robusta base carries the lane and its pull-tab. Regular bases in 2 in or 2.5 in widths and depths up to 24 in adapt the system to your shelf, while the support plate is chosen for your can format. These retail display pushers are configured lane by lane, so a single shelf can mix several can sizes once each one is validated.
| Robusta component | Documented dimensions |
|---|---|
| Regular bases | 2 in or 2.5 in wide, depth up to 24 in |
| Divider bases | 2 in wide, depth up to 24 in |
| Dividers | 4 in high |
| Mobile pushers | 4 in or 6.75 in |
| Support plates | 1.88 in to 2.75 in × 2 7/8 in; XXL format 4 in × 6 in |
| Retaining strips and rear blocks | 5 ½ in wide, in 36 in or 48 in lengths |
| Cans shown | 473 ml, on two levels |
Shelf Dividers for Cleaner Can Categories
Shelf dividers separate cans by brand, flavour, style, size or product family. Divider bases are 2 in wide and dividers reach 4 in in height, enough to guide each column from front to back. Clean lanes make the category easier to read for shoppers and faster to restock for staff.
Label Holders for Pricing and Product Information
Label holders put the price and product information right under the matching lane. With cans stacked two high, a clear label at the shelf edge confirms the flavour, the format and any promotion at a glance, and it stays in place when the lane is refaced. Concept P.O.S. also offers price moldings and accessories to complete the shelf edge.
Display Rack Solutions for Can Merchandising
Some projects call for more than a shelf: a dedicated zone for a brewery, a promotional end cap for a new flavour or a compact section near the checkout. Custom display pushers can be integrated into these areas so the same double-stacked can presentation follows the product wherever it is merchandised. For beverage lanes on a single level, our beverage pusher and slide systems offer another approach.
Designed for Different Retail Environments
Double-stacked cans are sold wherever beverages move quickly, and the same organization principles apply from one store format to another. In convenience stores, where shelves are short and traffic is constant, two levels of cans per lane add product without adding shelf space, and the pull-tab keeps the section presentable between deliveries. In grocery stores and supermarkets, long beverage aisles carry dozens of brands and flavours that benefit from clean lanes and clear labels.
Specialty beer shops and microbrewery counters present a wide, changing selection of 473 ml cans, often browsed slowly and handled a lot. Micro-markets and gas station stores need compact, self-service displays that stay tidy without constant supervision. Pharmacies and mass retailers with a beverage aisle face the same challenges on a smaller scale.
In every case, the configuration starts from your shelves and your assortment rather than from a standard layout. Where cans are sold refrigerated, the project is reviewed with our team, since cold aisles belong to the Blizzard model.
Benefits of Double-Stacked Can Shelf Management Systems
The gains show up in two places: what the shopper sees at the shelf edge, and what your team no longer has to do by hand.
Better Product Visibility
Cans brought back to the front show their labels on both levels, without shoppers having to lean in or reach to the back. A full, aligned facing makes each flavour easier to spot from the aisle and highlights the range you carry.
Cleaner Shelf Presentation
Dividers, retaining strips and the pull-tab together keep the lanes straight and the stacks aligned. The section keeps the polished look of a freshly stocked shelf for longer, even in high-traffic beverage aisles.
Less Time Spent Refacing
Refacing a lane of stacked cans comes down to one pull instead of unloading and restacking by hand. Staff can face a whole section during a regular round and spend the time saved on service and replenishment.
Easier Category Navigation
One lane per flavour and a clear label under each lane make the category easier to read. Shoppers find their brand, style or size quickly and compare without disturbing the display.
Custom Solutions for Different Product Formats
Every project is configured to your shelves and your cans: base width, depth up to 24 in, support plate, divider layout and retaining strips. These display pushers adapt to each section's assortment, from a single flavour to a full beverage wall, once each format is confirmed with our team.
Work With Concept P.O.S. on Your Two-Level Can Display Project
Concept P.O.S. designs and manufactures custom shelf management systems for retailers and product manufacturers. For cans stacked on two levels, we build on Robusta, the pusher family designed for packaged merchandise in high-traffic aisles, here in its pull-tab version. Robusta sits alongside Blizzard for refrigerated and frozen aisles, and Prestige and Compact for smaller items.
Our team starts from your shelves, your can formats and your merchandising goals, then recommends the bases, dividers, retaining strips, support plates and label holders that fit. Send us your measurements and a photo through the form, call 1 (888) 422-0605 or write to sales@conceptpos.com to request your custom quote.